sol_bar www.biancaboya.com




Decorative Coating (Thick-Textured)

CEMENT BASED MINERAL COATING with GRITTY STRUCTURE
An exterior decorative mineral coating with granules of 2 mm. Designed to be used as a topcoat. Durability improved due to several chemicals and polymers. White cement  based contains fiber additives, produced in powdery state.

AREAS OF USE
• Cement based plaster.
• Ordinary Concrete.
• Surfaces where filler has been applied.
• Properly applied rough plaster.
• Concrete plates and panels.
• Can be applied with certainity upon Bianca Isı Yalıtım Sistemi (Bianca Heat Insulation System).

SPECIFICATIONS
• Decorative due to various possible application methods which provide different texture. Amends surface defects.
• Resistive to climatic conditions an temperature shocks, due to chemical additives of high quality. Polymer additives provide its superb adherence characteristic. An elastic and  water-proof material.
• Due to decorative appearence covers and hides pores cracks and other defects of plaster. Is applied easily with a steel spatula. Provides time and labour saving.
• Because of fibered structure is highly vapour conductive does not hinder building aeration. Inhibits fungi and bacteria formation.

THE SURFACE PRETREATMENT

The surface Bianca Dekoratif Kaplama Kalın Dokulu (Bianca Decorative Coating Thick-Textured) is to be applied on has to be clean, dry and durable. Pored and highly absorbent surfaces are to be wet. The holes and cavities of the surface are to be mend at least 72 hrs before the application Bianca Dekoratif Kaplama Kalın Dokulu (Bianca Decorative Coating Thick-Textured).

APPLICATION
One bag Bianca Dekoratif Kaplama Kalın Dokulu (Bianca Decorative Coating Thick-Textured) (25,00 kg) is dissolved in 7-8 lt of clean water and mixed by means of a mixer until a homogeneous mixture is obtained. Before the application the mixture should rest for 10 min. and after that mixed once more. The mixture is to be consume in 2 hrs. Within this period if the brakes are held the mixture should be mixed once again. Has to be applied with a steel spatula properly, and excessive material has to be removed from the surface immediately. A decorative design can be drawn within 10 minutes after application.

CONSUMPTION PER m²
2.75 kg/m² This characteristic may chenge depending on application methods and the surface.

SOME IMPORTANT ASPECTS
Should not be applied on unsteady surfaces. If the surface the Bianca Dekoratif Kaplama Kalın Dokulu (Bianca Decorative Coating Thick-Textured) is to be applied on is absorbent or too hot and dry due to weather conditions, it should be wet. The weather temperature during the installation has to be between +5ºC and+30ºC. Drying of the outer skin takes 6 hrs. in +20ºC and with 65% humidity. Complete drying and full resistivity comes in 2-3 days. In hot wether The Coating has to be kept wet for 2 days.

STORAGE CONDITIONS
The product is to be kept in dry and cool conditions being protected against harmful effects. It is suggested that product in unopened package should be consumed within 6 months.

PACKING
Bianca Dekoratif Kaplama Kalın Dokulu (Bianca Decorative Coating Thick-Textured) is packed in bags by 25,00 kg ±%2 as dry powder. It is allowed to lay 10 bags on each other.

SAFETY WARNING
Contains cement alkali based. In case of contact with skin wash out with large amount of water and see a doctor immediately. Store in a place inaccessible for children.

 









 

Bianca 10. Yıl Logosu