Bianca Boya
   
V.I.P. FANTASIA
This is a decorative final layer paint that is used on internal surfaces. Its superior diffusion capability and its water based silicone added texture creates a soft matte appearance that enables  wiping and cleaning.

AREAS OF USE:
Due to its soft matte appearance it can be used for decorative and restorative purposes on internal surfaces on which satin plaster or paste is applied, as well as on wall coatings, wooden surfaces and
at special places such as hotels, hospitals, schools, restaurants, children’s rooms.

SPECIFICATIONS
Has a superior diffusion and coverage capability.
• It has been reinforced with the use of silicone technology.
• It can be wipe cleaned very easily.
• It has a soft matte texture.
• It is water based and has high breathing capacity.
• It integrates very well with the surface that it is applied on and as such it is not prone to cracks, blistering or disintegration.
• During application due to its very high diffusion capability, helps save on labor costs.  
• During application it does not emit a disturbing scent.

APPLICATION:
The surfaces on which Bianca V.I.P. Fantasia will be applied must be solid, clean and dry and they must be free of any and all kinds of dirt, grease and dust. Old paint must be scraped off and the surface of the wall must be smoothed out by using satin plaster or adhesive paste. The surface that was treated as such must be left to dry for 24 to 48 hours. The rough parts on the surface must be sanded to get rid of the unevenness. After the surface is prepared as described above Bianca Vals Primer is applied. Bianca Vals Primer is applied in one layer without any dilution, following the application the surface is left for drying for 24 hours. After ensuring that dryness is achieved, Bianca V.I.P. Fantasia will be applied in two layers on the surface by using a brush, or a roll or by spraying. During application care must be taken to make sure that the temperature of the surface as well as the environment is between +5ºC and +30ºC.

THINNING (Volume):
Dilute to a maximum of 10% by using water. Before using the paint mix it well and do not mix it with another brand of paint.

DRYING PERIOD (20ºC):
Dry to the Touch: 15 minutes. Dust-Free: 1 hour. Second Layer Application: 6 hour. Final Drying: 24 hour. It reaches the necessary endurance level for tests after 3 days.

COVERAGE:
With 1 Liter, based on the application method and type of the surface, 16 – 17 m² area can be covered in single layer.

STORAGE:
Shelf life is 2 years when stored unopened, dry and cool conditions.

PACKING:
15.00 l.

HEALTH, SAFETY AND ENVIRONMENT

• While applying paint wear eye protective glasses
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
• Ensure maximum ventilation during application and drying.
• Keep container tightly closed and keep out of reach of children.
• Protect from frost and extreme temperature.
• Do not empty the excess paint into sink or closed.
• Clean paint brush and roller with water after each application.
• Ensure this pack is stored upright and secure during transportation.