Bianca Boya
   
FORZA SILICONE BASED EXTERIOR PRIMER
Silicone copolymer emulsion based, surface filling, exterior white primer .

AREAS OF USE: All plastered wall surfaces, brick, concrete  surfaces, etc.

SPECIFICATIONS

• Forms a link between the paint and the surface.
• Reduces the paint consumption.
• Prevents water and moisture penetration in great scale.
• Prevents the generation of moss and bacterium.
• Decreases differential absorption of the paint by the surface.
• Prolongs the paint’s lifetime.

APPLICATION:
The surfaces subject to Forza Silicone based Exterior primer (White Primer) application must be clean and dry, free from all kinds of dirt, oil and dust. Forza Silicone based Exterior primer (White Primer) is applied as a first layer either with brush, roller or spraying. Forza Silicone Based Exterior Paint is used 6 hours after the application of Forza Silicone based Exterior primer (White Primer). The temperature of the surface and the atmosphere, should be between +5ºC, and. +30ºC.

THINNING (Volume):
To be thinned with at most 10 % of water.

DRYING PERIOD (20ºC):
Primary Drying: 15 minutes. Final Drying: 1 hour.

COVERAGE:
1 Lt. of Bianca Forza Silicone Based Exterior Primer covers 10 – 12 m² a single dry film depending on the surface to be painted.

STORAGE:
Shelf life is 2 years when stored unopened, dry and cool conditions. 

PACKING:
12,00 l.

HEALTH, SAFETY AND ENVIRONMENT

• While applying paint wear eye protective glasses
• In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
• Ensure maximum ventilation during application and drying.
• Keep container tightly closed and keep out of reach of children.
• Protect from frost and extreme temperature.
• Do not empty the excess paint into sink or closed.
• Clean paint brush and roller with water after each application.
• Ensure this pack is stored upright and secure during transportation.